Netscout Indexes To The Interface Table (Iftable - Paradyne 9820 User Manual

NetScout Indexes to the Interface Table (ifTable)

For remote monitoring at sites where FrameSaver units are operating with
NetScout Probes, use the following ifName, ifDescr, and ifIndex.
9820-A2-GB20-20
Table B-2. NetScout Interface Objects Information
ifName Description
Frame Relay Logical Layer
Frame Relay 4 Network Synchronous
Network Data Port
V.35/ X.21
RMON Logical Layer
RMON Frame These values are
Relay Logical calculated.
Interfaces
For the DTE: For the DTE:
(9820 and (9820 and
(ifIndex –1) * 2 +17
9820-2M)
For the DCE: DTE
calculated value +1
RMON Virtual These values are
Interfaces calculated based on
the probe's internal
circuit index: circuit
index +65.
RMON Virtual These values are
Logical calculated.
Interfaces
For the DTE:
(9820 and
(virtual interface
9820-2M) 9820 2M)
ifIndex – 65) * 2 ifIndex – 65) * 2
+513
For the DCE:
DTE calculated
value +1
June 2000
SNMP MIBs and Traps, and RMON Alarm Defaults
ifDescr (ifEntry 2)
For the user side:
RMON (IN/OUT); Network
Synchronous Data Port of
FR DTE, Slot: 1, Port: 2;
DP FR NAM; Hardware Version:
hhhh-hhh
For the network side:
RMON (IN/OUT); Network
Synchronous Data Port of
FR SERVICE, Slot: 1, Port: 2;
DP FR NAM; Hardware Version:
hhhh-hhh
OUT – RMON (IN);
[ ifName of the interface ]
OUT – RMON (OUT);
[ ifName of the interface ]
—
IN – VIRTUAL PVC
[ interface number ]
[ DLCI number ] DTE
OUT – VIRTUAL PVC
[ interface number ]
[ DLCI number ] DCE
ifIndex
4
17– 48
65 – 512
(9820 and
9820-2M)
65 –
100000000
(9820-8M
and
9820-45M)
513 –1023
B-5