Controlling Snmp Access; Disabling Snmp Access - Paradyne 9820 User Manual

Security and Logins

Controlling SNMP Access

Disabling SNMP Access

5-8
The FrameSaver unit supports SNMP Version 1, which provides limited security
through the use of community names. There are three methods for limiting SNMP
access:
Disabling SNMP access.
Assigning SNMP community names and the access type.
Assigning IP addresses of those NMSs that can access the unit.
When the SNMP access is disabled, the FrameSaver unit will not respond to
SNMP messages.
Procedure
To disable SNMP access:
1. Select the General SNMP Management options.
Main Menu Configuration
General SNMP Management
2. Disable the SNMP Management option.
3. Save your change.
Configuring General SNMP Management
See
Options, for more information about General SNMP Management configuration
options.
June 2000
Management and Communication
in Chapter 4, Configuration
9820-A2-GB20-20