Entering System Information And Setting The System Clock - Paradyne 9820 User Manual

Configuration Options
Entering System Information and
Setting the System Clock
4-4
Table 4-1. Easy Install Configuration Options (2 of 2)
Ethernet Port Options Screen
With the cursor on the Ethernet Port Options Screen field, press Enter. The Ethernet
Port Options screen appears. See
After configuring the Ethernet port configuration options, save your changes. Then
press ESC to return to the Easy Install screen.
Select System Information to set up or display the general SNMP name for the
unit, its location, and a contact for the unit, as well as to set the system clock.
Main Menu Control
The following information is available for viewing. Save any entries or changes.
If the selection is . . . Enter the . . .
Device Name Unique name for device identification of up to 20 characters.
System Name SNMP system name; can be up to 255 characters.
System Location System's physical location; can be up to 255 characters.
System Contact Name and how to contact the system person; can be up to
255 characters.
Date Current date in the month/day/year format (mm/dd/yyyy).
Time
Current time in the hours:minutes format (hh:mm:ss).
NOTE:
To clear existing information, place the cursor in the Clear field ( Tab to the
Clear field ) and press Enter.
See Chapter 5, Security and Logins
June 2000
Configuring the Ethernet Port
System Information
, to set up and administer logins.
on page 4-50.
9820-A2-GB20-20