Dlci Alarm Defaults - Paradyne 9820 User Manual

DLCI Alarm Defaults

Table B-13. Static DLCI Alarm Defaults (1 of 2)
Sample
Item
Type
Current Latency A
Average Latency A
Frames Received D
Frames Sent D
Tx Frames D
Exceeding CIR
1
D = Delta. Indicates that the calculated difference between the current value and the previous value is contained
in the MIB.
A = Absolute. Indicates that the exact value for the item is contained in the MIB.
2
I in the OID = Interface ID of the frame relay link.
D = DLCI number.
9820-A2-GB20-20
These alarms can be created during RMON initialization or when a DLCI is
created. For Models 9820 and 9820-2M, they are put into the NetScout alarm
area; for Models 9820-8M and 9820-45M they are grouped with the DLCI Alarm
Defaults in the Paradyne area.
Table B-13 identifies alarm defaults that do not change, and
alarm defaults that change when the interface's line speed changes.
The thresholds for these alarms can be edited using NetScout Manager Plus so
they match the values in the SLA between the customer and service provider. Up
to eight alarms per interface are allowed. Any additional alarms are added to the
Paradyne Area alarms and they cannot be changed using NetScout software.
See Editing Alarms in Chapter 10, Setting Up NetScout Manager Plus for
FrameSaver Devices .
2
1
MIB/Tag/OID
MIB: pdn_FrExt.mib (E)
Tag: devFrExtLatencyLatest
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9.4.3.1.7.I.D
MIB: pdn_FrExt.mib (E)
Tag: devFrExtLatencyAvg
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9.4.3.1.5.I.D
MIB: FR DTE MIB
(RFC 2115)
Tag: frCircuitReceivedFrames
OID: .1.3.6.1.2.1.10.32.2.1.
8.I.D
MIB: FR DTE MIB
(RFC 2115)
Tag: frCircuitSentFrames
OID: .1.3.6.1.2.1.10.32.2.1.
6.I.D
MIB: pdn_FrExt.mib (E)
Tag: devFrExtDlciTxFrOutCIR
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9.4.1.1.17.I.D
June 2000
SNMP MIBs and Traps, and RMON Alarm Defaults
Event
Interval
Type
60 secs None
(1 min)
900 secs None
(15 mins)
60 secs None
(1 min)
60 secs None
(1 min)
60 secs None
(1 min)
Table B-14 identifies
Rising Falling
Threshold Threshold
Default Default
Must be 0
configured.
Must be 0
configured.
Must be 0
configured.
Must be 0
configured.
Must be 0
configured.
B-21