Dmx Profile - ETC Desire series User Manual

DMX Profile

The current DMX profile is displayed on the DMX Settings menu. You can customize the
setting by selecting a different profile. For detailed information about each profile, see
page 32.
on
Step 1:
DMX Start Address:
DMX Profile:
Strobe:
Data Loss:
Plus Seven:
DMX Profile:
Figure-3.5 Selecting DMX Profile on the DMX Settings Menu.
Step 2:
Strobe
Strobe adds another DMX channel of control at channel 5 (or channel 9 when operating in a
Direct Control profile). When enabled, the Strobe channel controls the fixture output as
follows.
DMX Value
0
1 to 254
255
Step 1:
DMX Start Address:
DMX Profile:
Strobe:
Data Loss:
Plus Seven:
DMX Profile:
Figure-3.6 Enabling Strobe on the DMX Settings Menu.
Step 2:
Step 3:
56
On the DMX Settings menu, scroll to DMX Profile.
DMX Settings
Enabled
Instant
Enabled
6 chan
3/15 Saturation
Press [ ] to set the desired profile.
Full on
Variable rate from slow to fast
Full on
On the DMX Settings menu, scroll to Strobe.
DMX Settings
Instant
6 chan
5/15 Strobe
Press [ ] to toggle between On and Off.
Press [ ] or [ ] to commit the option.
101
HSIC
Strobe Effect
101
HSIC
On
On
Profiles
Desire Series v1.8.0 User Manual