ETC Desire series User Manual page 28

Plus 7
Strobe
40
1 – Hue (coarse)
2 - Hue (fine)
Adds seven additional color control channels to RGB, HSI, HSIC, and
3 – Saturation
Studio input profile settings. For example HSI with 'Plus 7' enabled
4 – Intensity
becomes an 15-channel profile
5 – Strobe
6 – n/a
The desired color and intensity are achieved by using the HSI or RGB
7– Plus 7 Control on/
channels
off
8– Red
Placing channel seven at a value over 51% gives the fixture a 14
9– Orange
channel profile.
(white if Lustr+)
10 – Amber
Channels 8-14 represent the native colors of the fixture and allow
11 - Green
the operator to adjust individual color channels to fine tune the
12 - Cyan
color output.
13 - Blue
14- Indigo
Variable strobe control: 0% is no strobe. The fixture output will strobe more rapidly as the
strobe-channel value approaches 100%.
Desire Series v1.8.0 User Manual