ETC Desire series User Manual page 44

Protected
Protected provides the most consistent output possible with the greatest potential for
reduced overall brightness. This is best for outdoor use, changing environmental
temperatures, and applications with high requirements for consistency in extreme operating
conditions.
Boost
Boost provides the brightest possible output, with least guarantee of consistency. This is best
for applications with low duty cycles, loose brightness requirements, or where ambient
temperature is low.
Step 1:
Step 2:
Step 3:
Step 4:
Note:
60
On the Advanced Menu, scroll to LED Settings.
Press [ ].
With Output selected, press [
Press [ ] or [ ] to commit the option.
In all Output settings, if the fixture gets too warm and internal components approach
unsafe operating temperatures, the total power to the LED array is gradually reduced
and proportionate brightness levels between the various colors of LEDs are
maintained as much as possible in order to preserve the overall color mix; however,
some minor shifts in output may occur. Power continues to ramp down as much as
necessary until internal fixture components return to a safe temperature. The fixture
displays a warning message on the home screen indicating that power budgeting is
in place, showing the percent of total power that is currently used.
If the fixture exceeds its maximum internal temperature, the fixture enters a cool-
down state, stops responding to the control signal, and it shuts down most or all
power to the LED array and displays its over-temperature status according to its
setting for over-temperature warning.
] to toggle between the options.
Desire Series v1.8.0 User Manual