Installation; Mounting Hardware - ETC Desire series User Manual

Installation

Mounting Hardware

Four options are available for mounting Desire fixtures.
• Yoke with C-clamp
• Floor stand
• Canopy (D22)
• Track mount (D22)
Installing the Floor Stand
The floor standing yoke assembly replaces the included standard yoke so that the fixture can
be placed on a floor and tilted to the desired angle.
Main
yoke
Figure-1.1 Fixture with Floor Stand.
Step 1:
Step 2:
Step 3:
Step 4:
Installing D22 Canopy and Track
For detailed installation information, reference the Desire Series D22 Installation Guide. ETC
manuals are available for download at http://www.etcconnect.com/downloads.aspx.
22
Remove the yoke locking knob with the flat washer.
Remove the yoke bolts and flat washers that attach the yoke on each side of the fixture.
Attach the yoke and floor standing yoke assembly to the fixture with the two yoke bolts
and two flat washers.
Insert the yoke locking knob and flat washer and tighten.
Yoke locking knob
Yoke bolt
Floor standing yoke
Desire Series v1.8.0 User Manual