ETC Desire series User Manual page 23

RGB
Effectively addresses all 7 colors via three channels of control. The RGB profile produces
medium-quality color crossfades. It makes the Desire fixtures compatible with conventional
RGB console profiles while maintaining enhanced color production from the fixture. Also see
Color Matching
Data Channel
1 Fixture address
2 Fixture address + 1
3 Fixture address + 2
4 Fixture address + 3
5 Fixture address + 4
Note:
Studio
The fixture produces only white-type light, which is adjustable from 2700 to 6500K. The
Studio profile uses 3 DMX channels to control Intensity, white point, and tint, (the
green/magenta balance). Tint is adjustable without affecting the white point. All three control
parameters are adjustable via DMX as well as onboard with instant access via UI buttons (no
menus to scroll).
Studio is the default mode for Studio HD fixtures. The Studio profile is also available on all
other Desire Series fixtures. For more information, see
Color Matching
Data Channel
1 Fixture address
2 Fixture address + 1
3 Fixture address + 2
4 Fixture address + 3
5 Fixture address + 4
Strobe
In most profiles (Vivid, Lustr+, Fire and Ice, Studio HD), strobe is assigned to channel 5. It adds
another channel to any of the DMX profiles. Under the Advanced Settings menu, the strobe
function may be disabled and the additional channel for strobe will not be used by the fixture.
With strobe at either DMX value 0 or 255, the fixture output is constantly on. At DMX 1, the
fixture strobes slowly and increases in speed toward DMX 254.
34
page 35.
on
Control
Red
Green
Blue
—
Strobe
The RGB profile is optimized for maximum brightness at all settings. Sometimes small
changes in RGB values may produce unexpected jumps in brightness.
Shifts in brightness may be perceived during color crossfades in cues and presets.
page 35.
on
Control
Intensity
White point: 2700 to 6500K
Tint
—
Strobe
Value
0 to 255 Intensity 0 to 100%
— —
0 to 255 Variable strobe control
Studio Settings
on
Value
Intensity 0 to 100%
0 = 3200K
1 to 254 = 2700K to
6500K
255 = 5600K
0 = neutral white
0 to 255
1 to 127 = full plus-green
to neutral white
128 = neutral white
129 to 255 = neutral white
to full minus-green (full
magenta)
— —
0 to 255 Variable strobe control
Desire Series v1.8.0 User Manual
Function
page 84. Also see
Function