ETC Desire series User Manual page 50

Backlight
You can change the brightness of the LCD backlight. The brightness level is 10 to 100%. The
default is 100%.
Step 1:
Step 2:
Step 3:
BLght time out
You can change the length of time the LCD backlight remains on after a UI button has been
pressed. The options are 30 seconds, 1 minute, 5 minutes, 15 minutes, and never. The default
is 1 minute.
Step 1:
Backlight:
BLght time
Language:
Status Indicators:
OverTemp:
Restore Defaults
Figure-3.40 Setting Backlight Timeout.
Step 2:
Step 3:
Language
The screen language is English.
Backlight:
BLght time out:
Language:
Status Indicators:
OverTemp:
Restore Defaults
Figure-3.41 Screen Language Set to English.
Operation
With Backlight selected, press [
Press [ ] or [ ] to set the desired brightness percentage. The effect can be seen as
you make the adjustment.
Press [ ].
With BLght time out selected, press [
Local Settings
out:
English
Visible
Continue to press [ ] until the desired time is indicated.
Press [ ]or [ ] to commit the option.
Local Settings
English
Visible
]to select the value.
].
100%
1 min
Off
100%
1 min
Off
81