ETC Desire series User Manual page 22

Color Mixes
The following table shows the color mixes for each fixture type.
Color
1
2
3
4
5
6
7
HSI (Hue Saturation Intensity) and HSIC (Hue, Saturation, Intensity, Color
Temperature (White Point))
The HSI profile uses 4 channels of DMX input, corresponding to 16-bit hue (two channels:
coarse and fine), saturation, and intensity. The HSI profile makes Desire fixtures compatible
with conventional HSI console profiles while capitalizing on fixtures' expanded color
capabilities. Channel 5 is for Strobe, when enabled. Also see
HSIC is similar to HSI, except that it uses an additional 6th channel to control the color
temperature of the white point. White point is the color temperature of the white-light
output when saturation is at zero. The Red Shift function is automatically disabled in the HSIC
profile. The white point address of the D60 occupies a different address. For information
about the D60 DMX footprint, refer to
Lustr+, Studio HD)
Data Channel
1 Fixture address
2 Fixture address + 1
3 Fixture address + 2
4 Fixture address + 3
5 Fixture address + 4
6 Fixture address + 5
Note:
Installation and User Interface
Fire
Red Red
Red-orange —
Amber —
Green Green
— Cyan
— Blue
Indigo Indigo
page 38.
on
Control
Hue coarse
Hue fine
Saturation
Intensity
Strobe
White point
The HSI profile is optimized for maximum brightness at all settings.
At some settings, small changes in hue and saturation may produce unexpected
jumps in brightness.
Shifts in brightness may be perceived during fades across hue, saturation, or both in
cues and presets.
Ice Lustr+
Red
White
Amber
Green
Cyan
Blue
Indigo
D60 (Vivid, Lustr+, Fire, Ice, Studio HD) D60X (Vivid,
Value
0 to 65535
0 to 255
Vivid Studio HD
Red Red
Red-orange Amber
Amber Green-cyan
Green Blue
Cyan Warm white
Blue Cool white
Indigo —
Color Matching page
on
Function
Hue 0
Saturation 0 to 100%
Intensity 0 to 100%
Variable strobe control
Color temperature 2000-
8375K
35.
33