Sync Port Led Indicators - Cisco ASR 9001 Hardware Installation Manual

Sync Ports Connection Guidelines

SYNC Port LED Indicators

The SYNC port connector has integral LED indicators (see the following figure). When lit, these LEDs
indicate:
• in BITS mode:
• in J.211 mode:
Figure 27: SYNC Port Connector
Table 7: BITS/J.211 Connector Pinout
Pin
1
2
3
4
5
6
7
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
30
◦Green — Connection is alive.
◦Amber — A fault has occurred.
◦Green — DTI is operating in normal mode.
◦Amber — DTI is operating in fast mode.
Signal
DTI_P/BITS_RX_P
DTI_P/BITS_RX_N
—
BITS_TX_P*
BITS_TX_N*
—
—
Preparing for Installation
Note
Bi-direction for DTI, T1/E1/64K
Input
Bi-direction for DTI, T1/E1/64K
Input
—
T1/E1/6.321M Output
T1/E1/6.321M Output
—
—