General Safety Guidelines - Cisco ASR 9001 Hardware Installation Manual

Preparing for Installation
Note that this section contains guidelines, and do not include every potentially hazardous situation. When you
install a router, always use caution and common sense.

General Safety Guidelines

• Never attempt to lift an object that might be too heavy for you to lift by yourself.
• Always disconnect the power source and unplug all power cables before lifting, moving, or working on
• Keep the work area clear and dust free during and after installation.
• Keep tools and router components away from walkways and equipment rack aisles.
• Do not wear loose clothing, jewelry (including rings and chains), or other items that could get caught
• Fasten your tie or scarf and sleeves.
• Operate Cisco equipment safely by using it in accordance with its electrical ratings and product usage
• Do not work alone if potentially hazardous conditions exist.
• Always unplug power cables when performing maintenance or working on the router, unless the
• Ensure that the installation of the router is in compliance with national and local electrical codes: in the
Compliance and Safety Information
Both the Cisco ASR 9001 Router and the Cisco ASR 9001-S Router are designed to meet the regulatory
compliance and safety approval requirements. See the
Cisco ASR9000 Series
Laser Safety
The line card ports in Cisco ASR 9001 Router are equipped with lasers. The lasers emit invisible radiation.
>Do not stare into open line card ports. Observe this warning to prevent eye injury:
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams
Warning
or view directly with optical instruments. Statement 1051
the router.
in the router.
instructions.
replacement part is hot swappable and designed for online insertion and removal (OIR).
United States, National Fire Protection Association (NFPA) 70, United States National Electrical Code;
in Canada, Canadian Electrical Code, part I, CSA C22.1; in other countries, International Electrotechnical
Commission (IEC) 364, part 1 through part 7.
Routers.
Regulatory Compliance and Safety Information for
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
General Safety Guidelines
3