Power Connection Guidelines
The figure below shows the type of terminal block required for DC-input cable connections.
Figure 20: DC Power Cable Terminal Block
The figure below shows DC power source cable connections for single DC power module.
Caution
To avoid shock hazard, be sure to apply shrink wrap tubing around the wire entry area of the terminal
block.
Warning
Hazardous voltage or energy may be present on power terminals. Always replace cover when terminals
are not in service. Be sure uninsulated conductors are not accessible when cover is in place. Statement
1086
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
20
Preparing for Installation