Installing The Chassis In A Four-Post Rack - Cisco ASR 9001 Hardware Installation Manual

Unpacking and Installing the Chassis
What to Do Next
Figure 31: Installing the Cisco ASR 9001 Chassis in a Two-Post Rack
1

Installing the Chassis in a Four-Post Rack

If you are installing the chassis without air plenum kit, you will need two side mounting brackets used to
attach the chassis to the rear posts as shown in the figure below. See
mounting bracket information.
To install the chassis in a four-post open rack, follow these steps:
Three screws on each side (minimum two) to attach
the chassis to the rack
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
Installing the Chassis in a Four-Post Rack
Before you Begin, on page 36 for
39