Installing And Removing Sfp And Xfp Modules; Cable Management; Cable Management Tray - Cisco ASR 9001 Hardware Installation Manual

Installing Modules and Cables in the Chassis

Installing and Removing SFP and XFP Modules

For information on installing and removing SFP and XFP modules, see the
Services Router Ethernet Line Card Installation Guide

Cable Management

The Cisco ASR 9001 Router includes a cable-management system that organizes the interface cables entering
and exiting the router, keeping them out of the way, and free of sharp bends.
Excessive bending of interface cables can damage the cables.
Caution
The cable-management system consists of these separate components:
• A cable-management tray
• A cable-management bracket

Cable Management Tray

A cable-management tray is mounted at the bottom of the Cisco ASR 9001 Router chassis for routing interface
cables to the RP. The following figure shows a typical cable routing through the cable-management tray.
Figure 50: Example Cable Routing through the Cisco ASR 9001 Router Cable Management Tray
.
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
Installing and Removing SFP and XFP Modules
Cisco ASR 9000 Series Aggregation
73