Viewing Attached Fibre Channel Devices
To view a list of the devices attached to this module:
1. In the Fibre Channel Status Menu, select Display Attached Fibre Channel
Figure 110: Initial Fibre Channel Device Display page
2. To scroll to the next port, press Enter.
3. To activate the display, select Refresh Device Display (R).
Note:
devices will be shown. To see all of the devices in R2R configurations, use Visual
Manage.
4. To view device details, select Display Device Details (D).
Network Storage Router M2402 User Guide
Devices (2).
The Fibre Channel Device Display page is displayed.
Figure 110
is an illustration of the Fibre Channel Device Display page when it
is first displayed.
See
Figure 111
for an illustration of the updated Fibre Channel Device
Display screen.
In Router-to-Router (R2R) configurations, only the first device of all the attached
Serial/Telnet User Interface
165