HP M2402 User Manual page 44

Installation
To connect the router to a Fibre Channel storage area network (SAN):
1. Locate the Fibre Channel ports on the back-side of the router.
Figure 23: Fibre Channel ports
2. Remove the rubber protector inserts from the SFP.
3. With the router powered off, connect the router to the Fibre Channel
26
environment, using the appropriate cabling. The Fibre Channel optical
connectors on the router are keyed for proper orientation.
Caution: The router has been qualified with a specific set of SFPs. Using an
SFP that has not been qualified by HP may cause the router to operate
improperly. See the Laser Safety section of this manual for more information.
Network Storage Router M2402 User Guide