Figure 80: SCSI Current Map display
Note:
between screens.
Creating a New Map
In the Device Mapping Configuration menu, Create New Map (3) is used to
create a new map for the module.
The Create New Current Map sub-screen is displayed.
At the prompt, enter a name for the new map. When a new map is created, it
automatically becomes the Current Map.
Removing the Current Map
In the Device Mapping Configuration menu, Remove Current Map (4) is used to
remove the Current map and restore the default map as Current.
A verification prompt is displayed.
Network Storage Router M2402 User Guide
The entire list may not fit on one screen. Press N or P to go back and forth
Serial/Telnet User Interface
133