Deleting A Map Entry; Clearing The Entries From The Current Map; Filling In The Current Map; Cloning The Current Map - HP M2402 User Manual

Note:
to detect all devices.

Deleting a Map Entry

To delete an entry from a map, in the Edit Map Entries screen, select Delete (D).
For Fibre Channel maps, at the prompt, either enter the LUN ID of the LUN to
delete or enter "D" to delete multiple LUN.
For SCSI maps, at the prompt, enter the Target ID and LUN ID of the LUN to
delete or enter "D" to delete multiple LUN.

Clearing the Entries from the Current Map

To remove all entries from the Current map, in the Edit Map Entries screen, select
Clear Map (3). A confirmation prompt is displayed.

Filling in the Current Map

To instruct the system to automatically fill in the Current map, in the Edit Map
Entries screen, select Fill Map (4).
All new devices are added to the end of the Current map.
After this operation is completed, the Edit Map Entries menu is redisplayed.
Note:

Cloning the Current Map

In the Device Mapping Configuration menu, Clone Current Map (6) is used to
make an exact copy of the Current map.
Note:
The new map must have a unique name.
After the cloning process is complete, this copy becomes the Current map.
Network Storage Router M2402 User Guide
Some operating systems require gaps be removed in the mapping table in order
Devices marked 'DOWN' are not mapped.
Auto Assigned maps and SCC maps cannot be cloned.
Serial/Telnet User Interface
143