HP M2402 User Manual page 76

Visual Manager User Interface
Note:
the Real-Time Clock screen.
58
Community Name – SET (default: private) is only applicable for the FA
MIB 2.2. See Appendix
more information.
Traps enables or disables SNMP traps for manager IP addresses.
If Traps are enabled, up to three Trap Manager IP addresses can be setup.
Trapped events are logged in an event log. Event logging captures up to the
last 215 events and then starts overwriting the log.
To ensure accurate event logging, verify the clock and date are correctly set in
IP Address is the address used for sending Trap notifications.
Typically, this is the IP address of the machine using the network management
application or MIB browser.
Filter Setting sets filtering of event notifications (described in
"SNMP Management Information Bases").
Event notifications correspond to the trace setting levels configured in the
Trace Settings Configuration menu. The filters that can be set include:
— Log All Events (Priority 0)
— Disable Event Logging (Priority 1)
— Error Events (Priority 6)
— Notify Events (Priority 4)
Row State is set to an integer in the range of 0 through 3. Options include:
— Disabled (0) clears to the default settings
— No Traps (1) no traps exist
— Row Exist (2) row exists but traps are not sent to target
— Send Traps (3) row exists and traps are sent
D, "SNMP Management Information Bases," for
Network Storage Router M2402 User Guide
Appendix D,