HP M2402 User Manual page 156

Serial/Telnet User Interface
2. Enter the desired LUN ID.
Note:
3. To select the map entry to edit, enter the number from the left-hand column of
Figure 85: Device List generated for a Fibre Channel port
4. In the Device List, to add a listed device to the map, enter the number from the
138
If the selected LUN is already present in the map, a prompt is displayed that
asks to either confirm the override or enter different address information.
A device selection list is automatically generated.
Devices cannot be mapped to their native port.
the Port Map Edit Display screen.
A Device List is displayed.
"Num" column.
If the selected device is already mapped, an error message will appear,
warning about adding a duplicate device.
Network Storage Router M2402 User Guide