Using The Stored Print Feature - Fuji Xerox DocuPrint P455 d User Manual

 Using the Stored Print Feature
When you send a job to the printer, you can specify in the print driver to store the job in the memory or hard disk.
When you are ready to print the job, go to the printer and use the operator panel menus to identify which job in the
memory or hard disk you want to print.
NOTE:
• The stored print feature is available when:
- The optional 512MB memory is installed.
- The RAM disk is enabled in the operator panel menu.
- RAM Disk is set to Installed in the print driver.
OR
- The optional hard disk unit is installed.
- Hard Disk is set to Installed in the print driver.
• The data in memory is cleared when the printer is turned off. The data on the optional hard disk unit is not cleared even when
the printer is turned off.
The stored print feature includes the following job types:
• "Secure Print" on page 134
• "Sample Print" on page 134
Secure Print
You can store print jobs secured with a passcode in the memory. Users with the passcode can print them from the
operator panel. This feature can be used to print confidential documents. You can select whether to delete the stored
job after printing. Otherwise, the stored jobs remain in the memory until you delete them from the operator panel or
turn off the printer, or in the hard disk until you delete them from the operator panel.
Send confidential data.
NOTE:
• Secure Print is available when you use the PCL 6 or PS driver.
Sample Print
The collated print job is stored in the memory or hard disk, but a single copy is printed automatically so you can
check the print result. If you do not have problems with the print result, you can choose to print more copies. This
prevents large number of misprinted copies from being printed at one time.
Send data.
NOTE:
• Sample Print is available when you use the PCL 6 or PS driver.
134
Printing Basics
Enter the passcode from
the operator panel.
One set is
printed.
Check if the print result
is OK.
Print data.
Confidential
Print the rest of sets
from the operator panel.