Setting Up The Queue - Fuji Xerox DocuPrint P455 d User Manual

 Setting Up the Queue
To execute printing, you must set up the print queue on your workstation.
NOTE:
• When you have finished setting up the queue, you can print jobs from the applications. Start the print job from the application,
and specify the queue in the print dialog box.
However, you may be able to print only from the default queue depending on the application. In these cases, before you start
printing, set queue you want to print to as the default queue. For information on specifying the default queue, see also
the Default Queue" on page
• For Red Hat Enterprise Linux 5/6 Desktop (x86)
The following procedure uses Red Hat Enterprise Linux 6 Desktop(x86) as an example:
1
Open the URL "http://localhost:631" using a web browser.
2
Click Administration.
3
Click Add Printer.
4
Enter root as the user name, and then enter the administrator password.
5
Click OK.
6
Select either of the following according to the type of your printer connection.
For network connections:
Select LPD/LPR Host or Printer from the Other Network Printers menu, and then click Continue.
a
Enter the IP address of the printer in Connection.
b
Format: lpd://xxx.xxx.xxx.xxx (the IP address of the printer)
Click Continue.
c
Enter the name of the printer in Name in the Add Printer window, and then click Continue.
d
You can optionally specify the location and description of the printer for further information.
If you want to share the printer, select the Share This Printer check box.
For USB connections:
Select FUJI XEROX DocuPrint XXX from the Local Printers menu, and then click Continue.
a
Enter the name of the printer in Name in the Add Printer window, and then click Continue.
b
You can optionally specify the location and description of the printer for further information.
If you want to share the printer, select the Share This Printer check box.
7
Select FX from the Make menu, and then click Continue.
8
Select FX DocuPrint XXX from the Model menu, and then click Add Printer.
The setup is complete.
You can optionally specify the default options settings of the printer.
• For SUSE Linux Enterprise Desktop 10/11 (x86)
The following procedure uses SUSE Linux Enterprise Desktop 11 (x86) as an example:
1
Select Computer → More Applications..., and select YaST on Application Browser.
2
Enter the administrator password.
YaST Control Center is activated.
98
Printer Connection and Software Installation
99.
"Setting