• Fault Time-out
Purpose:
To specify the amount of time the printer waits before canceling a job that stops abnormally. The print job is
cancelled if the time-out time is exceeded.
Values:
Off
*
On
60sec
3–300 sec
• Job Time-out
Purpose:
To specify the amount of time the printer waits for data to arrive from the computer. The print job is cancelled if the
time-out time is exceeded.
Values:
Off
*
On
30sec
5–300 sec
• Clock Settings
Purpose:
To specify the date and time formats.
Values:
Set Date & Time
Date Format
Time Format
*1 The default for Date Format varies depending on region-specific factory default.
178
Using the Operator Panel Menus
Disables the fault time-out.
*
Sets the amount of time the printer waits before canceling a job that
stops abnormally.
Disables the job time-out.
*
Sets the time the printer waits for data to arrive from the computer.
Time Zone
Sets the time zone.
Set Date
Sets the date depending on the Date Format settings.
Set Time
Sets the time.
*1
yy/mm/dd
Sets the date format.
mm/dd/yy
dd/mm/yy
12H
Sets the time in 12-hour format.
*
24H
Sets the time in 24-hour format.