Installing the Feed Roll and Nudger Roll
1
Unpack a new feed roll and nudger roll.
NOTE:
•
The feed roll and nudger roll have the same shape. There is no difference between the replacement rollers.
2
Insert the nudger roll into the right shaft. Set the knob of the roller into the notches of the clutch.
3
Insert the feed roll into the left shaft. Set the knob of the roller into the notches of the clutch.
NOTE:
•
Make sure that the feed roll and nudger roll are firmly set in the shaft and cannot be moved easily.
4
Hold the printer with both hands, and gently place the printer upright.
270
Maintenance