Fuji Xerox DocuPrint P455 D Setup Manual

This guide provides the installation instructions for the printer.
本说明书提供了打印机的安装说明。
Before installation, read the Safety Guide.
在安装前，请阅读《安全说明书》。
1
Check the Contents
Point
检查内容
Prepare a USB cable (2 m recommended) or a network cable and paper*1
准备USB电缆（推荐2米）或网络电缆以及打印纸
This guide
z
本说明书
Printer
z z Driver CD Kit
驱动程序光盘工具包
打印机
Power cord PS End User License Agreement
z z
PS终端用户许可协议
电源线
Watching the video setup
观看视频设置
2a
Insert the Driver CD Kit
插入驱动程序光盘工具包
Driver CD Kit does not support
Windows 98/Me/2000.
驱动程序光盘工具包不支持
Windows 98/Me/2000。
Select the [Start Setup] button, and follow the instructions.
选择 [开始设置] 按钮，然后按照说明进行操作。
Point
If the above screen does not appear automatically,
double-click eznavi.exe in the SetupVideo folder included on the Driver CD Kit.
如果未自动显示上面的画面，请在驱动程序光盘工具包工具包中的
SetupVideo 文件夹下双击 eznavi.exe。
Complete !
完成！
*1
。
*1 The printer does not support inkjet paper.
*1 打印机不支持喷墨打印纸。
Safety Guide
z
安全说明书
z PostScript Driver Library CD
PostScript驱动程序库CD
PS Driver Contract
z
PS驱动程序协议
Using this guide
使用本说明书
2b
Remove the packaging tapes
拆下包装胶带
3
Install optional accessories
安装可选附件
Refer to the installation guide provided with your
accessory.
请参阅附件随附的安装说明书。
DocuPrint P455 d
4
Load paper in the tray
Point
在纸盘中装入纸张
When setting up the printer, load A4 size paper or larger. When loading Legal size or user-specified print media, slide
the extendable part of the tray while pinching the lever.
设置打印机时，装入A4纸或尺寸更大的纸张。装入Legal尺寸纸张或用户指定的打印介质时，捏住导杆并同时
滑动纸盘的可延长部分。
1 2
Pull the tray out of the printer. Adjust the paper guides, and align the width guides against the edges of the paper.
将纸盘从打印机中拉出。 调整导纸器，使宽度导纸器与纸张边缘对齐。
5
Connect a USB or Network Cable
连接USB电缆或网络电缆
USB connection Wired network connection
USB连接
有线网络连接
6
Turn on the printer
1
打开打印机电源
Fuji Xerox Co., Ltd. (Edition) 1 June 2012
604E 66300 / DE5029Z2-1
Copyright© 2012 by Fuji Xerox Co., Ltd.
Printed in China
After confirming that the guides are securely adjusted, insert the tray into the printer.
调整好导纸器后，将纸盘插入打印机。
Point
For wireless connection, this step is not necessary.
对于无线连接，本步骤可忽略。
Network connector
网络接口
USB connector
USB接口
2
604E 66300
3
Do not select anything in New Hardware Found
Wizard that appears when the printer and your
computer are connected via a USB cable.
使用USB电缆连接打印机和计算机时，请勿在
弹出的"找到新硬件向导"中进行任何选择。
Continued overleaf
接 接下页