ProSoft Technology RLX2-IHW User Manual page 131

TX Rate
Temperature
Retries(%)
Uptime
Product
Image Ver
P State
ProSoft Technology, Inc.
November 3, 2016
This is the current modulation data rate being used for transmission by the
device. This may be slower than the configured nominal rate because of retries
or other environmental factors. For 802.11a/b/g devices, the data rate is
expressed in kilobits or megabits per second (e.g. 54Mb/s.) For 802.11n devices,
the data is expressed in MCS rates from 0 to 15 (e.g. MCS7.)
The internal temperature of the radio as measured on the circuit board in
degrees Celsius. Note that internal measured temperature always exceeds the
ambient external temperature.
This value is the ratio of packet re-transmission to total packet transmissions
during the last five-second interval.
The amount of time the device has been running since the last power cycle or
reset. For example 1d,4h,13m,25s.
The model of the RLX2 radio. The values can be RLX2-IHA, RLX2-IHG, RLX2-IHFN,
RLX2-IHFN-W, or RLX2-IHW.
This is the name of the image file loaded into the radio. It matches the Firmware
label displayed on the main radio webpage. For example, RLX2_v0036_R.
RLX2 Industrial Hotspot Series
Page 131 of 208