Resetting All Other Radios; Troubleshooting Ih Browser Error Messages - ProSoft Technology RLX2-IHW User Manual

Resetting All Other Radios

To retrieve the default password and return the radio to its default settings:
1. Remove power from the radio.
2. Locate the Reset button hole.
3. Insert the end of a paperclip or similar device into the hole to press the reset
button.
4. While holding the reset button in with a paperclip, attach power to the radio, and
continue to hold down the reset button for 30 seconds.
5. The radio will be reset to its default settings, including the password. The user
should now be able to log in using the default password: password

Troubleshooting IH Browser Error messages

An error message that occurs when using the IH Browser: Unable to scan for AP's
This error occurs when the IH Browser attempts to scan for radios and no valid network
connection exists on the PC, wired or wireless.
To correct this error, Confirm the PC has at least one active network (LAN) connection.
It could be a wired Ethernet connection or a wireless 802.11 connection.
Confirm the network connection has a valid IP address. The network connection might
need to have a static IP address assigned to it. Check the IP address of the network
connection to determine that one has been assigned.
ProSoft Technology, Inc.
November 3, 2016
RLX2 Industrial Hotspot Series
Page 57 of 208