ProSoft Technology RLX2-IHW User Manual page 42

RLX2 Industrial Hotspot Series
ProSoft Wireless Designer can suggest suitable antennas for the application based
on frequency band, data rate, distance, power output level, and other factors.

Consider drawing up the network plans on paper. As part of the drawing, assign a
logical name to each radio. These names can be assigned in the Radio's web
interface.

As part of the planning, a site survey may be helpful. You can hire ProSoft
Technology or a surveyor to perform a survey, or you can conduct the survey on
your own.

Protect radios from direct exposure to weather, and provide an adequate, stable
power source. Make sure the plan complies with the radio's power requirements
and cable specifications.
Important: Radios and antennas must be located at least 8 inches (20 cm) away from personnel.
Page 42 of 208 ProSoft Technology, Inc.
November 3, 2016