Installing/Removing The Battery - Sokkia CX-101 Service Manual

6. USING THE BATTERY
6.2

Installing/Removing the Battery

Mount the charged battery.

• Use the provided battery BDC70 for this instrument.
• When removing the battery, turn the power off.
• When installing/removing the battery, make sure that moisture or dust particles
do not come in contact with the inside of the instrument.
• Waterproofing property for this instrument is not secured unless the battery
cover and external interface hatch are closed, and the connector caps are
correctly attached. Do not use it with these open or loose, under the condition
where water or other liquid spills over the instrument.
PROCEDURE
1. Remove the cover while pressing the
buttons on both sides of the battery
cover.
2. Insert the battery with the arrow
shown on it downward while pressing
toward the instrument.

• Inserting the battery aslant may damage
the instrument or the battery terminal.
3. Close the cover. Listen for the click to
ensure that the cover is properly
closed.
28
Battery cover
Battery