Sokkia CX-101 Service Manual page 165

• To enter azimuth angle without
entering backsight station
coordinates, press {} to move
the cursor down to "Azmth" then
enter an angle value.
5. When [OK] is pressed in the
screen in step 4, the CX will
search for a traverse route. The
points from step 1 will be
displayed in the order in which
they were observed.
• This search can be stopped by
pressing {ESC}. If {ESC} is
pressed, a route can be
computed using only the points
found prior to the search being
stopped.
• When a traverse point with
recorded known point
coordinates is found, or there
are multiple foresight stations for
a point, the automatic route
search will stop. Press [LIST]
and select which foresight
station to use as the next point.

" Automatic route search"
6. Press [OK] to confirm the traverse
route.
24. TRAVERSE ADJUSTMENT
0 0 1 : T - 0 0 0 1
S e a r c h i n g
E x i t S e a r c h i n g
c o n f i r m ?
0 0 6 : T - 0 0 0 6
0 0 7 : T - 0 0 0 7
0 0 8 : T - 0 0 0 1
0 0 9 :
LIST
NO YES
OK
155