Sokkia CX-101 Service Manual page 168

24. TRAVERSE ADJUSTMENT

• It is also possible to perform traverse adjustment by pressing [TRAV] when
allocated to the OBS mode screen.

Allocating [TRAV]: "33.3 Allocating Key Functions"
• Traverse adjustment results of traverse points, points observed from traverse
points and traverse adjustment data will be saved in the currently selected JOB
as Notes data. Data including the distributed closure error will also be saved in
the currently selected JOB as ordinary coordinate data.
Traverse line record (3):
Adjustment setting record (1):
Closure error record (2x2):
Coordinate adjustment record
(No. of included points between start and end points):

Types of traverse
CX can calculate closed-loop and closed traverses. In both cases, the
azimuth for the start point (and for the end point in the case of a closed
traverse) must be set.
158
1. point names of start and end points
2. backsight station name and azimuth to
said backsight station
3. foresight station name and azimuth to said
foresight
The selected method for distributing closure
error.
1. precision and closure error for angle/
distance
2. coordinate closure error
Coordinates
closed-loop traverse