Sokkia CX-101 Service Manual page 238

30. REGISTERING/DELETING DATA
Select the input format and press
[ENT].

• Select either "T type" or "S type"
according to the communication
format used.

"33.1 Configuration -Config
Mode-" Communication
Setup
Coordinate data starts to be
entered from an external
instrument and the number of
received items is displayed on the
screen. When data reception is
completed, <Known data> is
displayed.
• Press {ESC} to stop data
reception in progress.
4. Receive the coordinate data for
the next known point. Then,
receive the coordinate data for
other known points.
5. Finish inputting the known points.
After all registration is complete,
press [ESC]. It returns to <Known
Point>.

• Selectable input formats
T type:GTS (Coord)/SSS (Coord)
S type: SDR33
228
Comms input
T type
S type
When "T type" is selected
Comms input
GTS(Coord)
SSS(Coord)
Comms input
Format
Receiving
GTS(Coord)
12