H3C S5120-EI Series Operation Manual page 218

Hide thumbs Also See for S5120-EI Series:

Table of Contents

[ProviderB-GigabitEthernet1/0/2] port link-type hybrid

[ProviderB-GigabitEthernet1/0/2] port hybrid vlan 2000 untagged

# Tag CVLAN 20 frames with SVLAN 2000.

[ProviderB-GigabitEthernet1/0/2] qinq vid 2000

[ProviderB-GigabitEthernet1/0/2-vid-2000] raw-vlan-id inbound 20

# Set the TPID value in the outer tag to 0x8200.

[ProviderA-GigabitEthernet1/0/3] quit

[ProviderA] qinq ethernet-type 8200

Configuration on third-party devices

Configure the third-party devices between Provider A and Provider B as follows: configure the port

connecting GigabitEthernet 1/0/3 of Provider A and that connecting GigabitEthernet 1/0/1 of Provider B

to allow tagged frames of VLAN 1000 and VLAN 2000 to pass through.

Chapters

Table of Contents