Displaying And Maintaining Vlan - H3C S5120-EI Series Operation Manual

To do...
Associate an IP subnet
with the current VLAN
Return to system view
Enter
Ethernet
interface view
Enter
Enter Layer-2
interface
aggregate
view or
interface view
port
group
view
Enter port
group view
Configure port link type as
hybrid
Configure the hybrid
port(s) to permit the
specified IP subnet-based
VLANs to pass through
Associate the hybrid
port(s) with the specified
IP subnet-based VLAN
After you configure a command on a Layer-2 aggregate interface, the system starts applying the
configuration to the aggregate interface and its aggregation member ports. If the system fails to do that
on the aggregate interface, it stops applying the configuration to the aggregation member ports. If it fails
to do that on an aggregation member port, it simply skips the port and moves to the next port.

Displaying and Maintaining VLAN

To do...
Display VLAN information
Display VLAN interface
information
Display hybrid ports or trunk
ports on the device
Use the command...
ip-subnet-vlan
[ ip-subnet-index ] ip
ip-address [ mask ]
quit
interface interface-type
interface-number
interface
bridge-aggregation
interface-number
port-group manual
port-group-name
port link-type hybrid
port hybrid vlan
vlan-id-list { tagged |
untagged }
port hybrid
ip-subnet-vlan vlan
vlan-id
Use the command...
display vlan [ vlan-id1 [ to vlan-id2 ] |
all | dynamic | interface
interface-type
interface-number.subnumber |
reserved | static ]
display interface vlan-interface
[ vlan-interface-id ]
display port { hybrid | trunk }
1-14
Remarks
Required
The IP network segment or IP address to
be associated with a VLAN cannot be a
multicast network segment or a multicast
address.
—
Required
Use either command.
In Ethernet interface
subsequent configurations apply to
the current port.
In port group view, the subsequent
configurations apply to all ports in the
port group.
In Layer-2 aggregate interface view,
the subsequent configurations apply
to the Layer-2 aggregate interface and
all its member ports.
Required
Required
Required
Available in any view
Available in any view
Available in any view
view, the
Remarks