H3C S5120-EI Series Operation Manual page 238

--------------------------------------------------------------------------
Errored-symbol Event period(in seconds)
Errored-symbol Event threshold
Errored-frame Event period(in seconds)
Errored-frame Event threshold
Errored-frame-period Event period(in ms)
Errored-frame-period Event threshold
Errored-frame-seconds Event period(in seconds)
Errored-frame-seconds Event threshold
Use the display oam link-event command to display the statistics about Ethernet OAM link events. For
example:
# Display Ethernet OAM link event statistics of the remote end of Device B.
[DeviceB] display oam link-event remote
Port :GigabitEthernet1/0/1
Link Status :Up
OAMRemoteErrFrameEvent : (ms = milliseconds)
---------------------------------------------------------------------
Event Time Stamp
Errored Frame Threshold
Error Running Total
The above information indicates that 35 errors occurred since Ethernet OAM is enabled on Device A, 17
of which are caused by error frames. The link is instable.
: 5789 Errored FrameWindow
: 1 Errored Frame
: 35 Event Running Total
1-10
: 1
: 1
: 20
: 10
: 1000
: 1
: 60
: 1
: 10(100ms)
: 3
: 17