Configuration Information - H3C S5120-EI Series Operation Manual

After completing the above configurations, you can use the following command to view the port security

configuration information:

<Switch> display port-security interface gigabitethernet 1/0/1
Equipment port-security is enabled
Trap is disabled
Disableport Timeout: 20s
OUI value:
GigabitEthernet1/0/1 is link-up
Port mode is macAddressElseUserLoginSecure
NeedToKnow mode is NeedToKnowOnly
Intrusion Protection mode is NoAction
Max MAC address number is 64
Stored MAC address number is 0
Authorization is permitted
Use the following command to view MAC authentication information:
<Switch> display mac-authentication interface gigabitethernet 1/0/1
GigabitEthernet1/0/1 is link-up
MAC address authentication is enabled
Authenticate success: 3, failed: 7
Current online user number is 3
MAC ADDR
1234-0300-0011
1234-0300-0012
1234-0300-0013
Use the following command to view 802.1X authentication information:
<Switch> display dot1x interface gigabitethernet 1/0/1
Equipment 802.1X protocol is enabled
CHAP authentication is enabled
EAD quick deploy is disabled
Configuration: Transmit Period
Quiet Period
Supp Timeout
The maximal retransmitting times
EAD quick deploy configuration:
EAD timeout:
Total maximum 802.1X user resource number is 1024 per slot
Total current used 802.1X resource number is 1
GigabitEthernet1/0/1
802.1X protocol is enabled
Handshake is enabled
The port is an authenticator
Authenticate state
MAC_AUTHENTICATOR_SUCCESS
MAC_AUTHENTICATOR_SUCCESS
MAC_AUTHENTICATOR_SUCCESS
30 s, Handshake Period
60 s, Quiet Period Timer is disabled
30 s, Server Timeout
30m
is link-up
1-18
AuthIndex
13
14
15
15 s
100 s
2