Displaying And Maintaining Poe; Poe Configuration Example - H3C S5120-EI Series Operation Manual

Displaying and Maintaining PoE

Display the mapping between ID,
module, and member ID of all PSEs.
Display the power state and
information of the specified PoE
interface
Display the power information of a
PoE interface(s)
Display the information of PSE
Display the power state and
information of all PoE interfaces
connected with the PSE
Display the power of all PoE interfaces
connected with the PSE
Display all information of the
configurations and applications of the
PoE configuration file
Display all information of the
configurations and applications of the
PoE configuration file applied to the
specified PoE interface

PoE Configuration Example

Network requirements
The device provides power supply for PDs through PoE interfaces.
GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 are connected to IP telephones.
GigabitEthernet 1/0/11 and GigabitEthernet 1/0/12 are connected to access point (AP) devices.
The power priority of GigabitEthernet 1/0/2 is critical.
The power of the AP device connected to GigabitEthernet 1/0/11 does not exceed 9,000
milliwatts.
To do... Use the command...
display poe device
display poe interface [ interface-type
interface-number ]
display poe interface power
[ interface-type interface-number ]
display poe pse [ pse-id ]
display poe pse pse-id interface
display poe pse pse-id interface power
display poe-profile [ index index |
name profile-name ]
display poe-profile interface
interface-type interface-number
1-8
Remarks
Available in
any view