Information In This Chapter; Chapter Seven At-A-Glance - Keysight N9912A Service Manual

Repair and Replacement Procedures

Information in This Chapter

Information in This Chapter
This chapter contains procedures for removing and replacing the major assemblies of your Keysight
Technologies PNA series microwave network analyzer.

Chapter Seven at-a-Glance

Section Title
Personal Safety Warnings
Electrostatic Discharge (ESD)
Protection
Assembly Replacement Sequence
Table of Removal and Replacement
Procedures
Removal and Replacement Procedures
Post-Repair Procedures
7-2
Summary of Content
Warnings and cautions pertaining to personal safety.
Information pertaining to ESD protection.
A step-by-step procedure for how to identify the faulty
assembly, replace it with a new one, and re-adjust your
analyzer when done.
A table of removal and replacement procedures and the
corresponding page number where they are located.
The actual procedures for removing and replacing the
major assemblies in your analyzer.
The procedures occur in assembly reference designator
numerical order.
A table of the proper tests, verifications, and
adjustments to perform on your analyzer after repair.
RF Analyzer
N9912A
Start Page
Page 7-3
Page 7-3
Page 7-4
Page 7-4
See Table 7-1
on page 7-4
for specific
procedures.
Page 7-37
Service Guide N9912-90003