Measurement Group - Keysight N9912A Service Manual

Replaceable Parts
Replaceable Parts Listings

Measurement Group

Reference
Designator Part Number
Replacement Assemblies
RF
N9912-60002
Assembly
System
Board N9912-60004
Assembly
Coax
Cable N9912-60029
Assembly
RF
Top Panel N9912-60021
Assembly
Separately Replaceable Individual Parts and Assemblies
A6 1150-8023
(1) N9912-60019
(4) N9912-20033
(10) N9912-20010
(11) N9912-20009
(13) 8160-0963
(15) 1250-2180
(17) 0515-0372
(22) W1312-40069
(25) N9912-20116
(26) N9912-20028
(27) 8121-0964
(28) 2190-0102
(29) 0590-1251
(30) 8121-1614
(31) 0515-0374
1.
Each time the N9912A case is opened for any reason, you must order a
"Miscellaneous Parts" on page
6-8
1
Qty Description
RF Assembly—Includes:
A4 RF board
System gasket kit assembly, 2 gaskets (1)
Polyiron (mixer house), w/pad (2)
RFI wafer gasket, qty 2 (3)
Insulator, qty 2 (4)
Polyiron, front end (5)
Polyiron, pre-amp (6)
Polyiron, input (7)
1 Shield, bottom, RF (8)
Shield, top, RF (9)
Cable W2, semi-rigid, RF IN (SA port) (10)
Cable W1, semi-rigid, RF OUT (NA port) (11)
Gap pad, 6 mm square (12)
RFI O-ring, qty 2 (13)
RFI strip, qty 4 (14)
Adapter, coaxial, straight, female type-N to female 3.5 mm, qty 2 (15)
Screw, machine w/crest cup washer, pan head, M3.0 x 12 mm, qty 30 (16)
Screw, machine w/crest cup washer, pan head, M3.0 x 8 mm, qty 4 (17)
System Board Assembly—Includes:
A5 system board
1
System gasket kit assembly, 2 gaskets (1)
Clamp, stick-on, qty 2 (18)
Coax Cable Assembly—Includes:
1 Cable W4 and W6, RF, flexible, qty 2 (19)
Spiral wrap, plastic (20)
RF Top Panel Assembly—Includes:
Panel, RF, machined (21)
Connector cover (tethered cap), for type-N connector, qty 2 (22)
Overlay, RF (23)
1
Gasket, RF (24)
Cable W3, RF coax with BNC connector, EXT TRIG/EXT REF connector (27)
Washer, internal tooth, 15/32-inch (28)
Nut, specialty, 15/32-inch - 32 thread (29)
1 SOM Board, 532 MHz processor, 128 MB-SDRAM
1 System gasket assembly, 2 gaskets for A5 system board
1 Insulator, w/pad
1 Cable W2, semi-rigid, RF IN (SA port)
1 Cable W1, semi-rigid, RF OUT (NA port)
2 RFI O-ring
2 Adapter, coaxial, straight, female type-N to female 3.5 mm
4 Screw, machine w/crest cup washer, pan head, M3.0 x 8 mm
2 Connector cover (tethered cap), for type-N connector
1 System board top shield (25)
1 Pad, A6 system board top shield to A2 LCD
1 Cable W3, RF coax with BNC connector, EXT TRIG/EXT REF connector
1 Washer, internal tooth, 15/32-inch
1 Nut, specialty, 15/32-inch - 32 thread
2 Cable W5 and W7, RF coax, flexible
4 Screw, machine w/crest cup washer, pan head, M3.0 x 10 mm
6-14.
Repair and Re-assembly Kit
Service Guide N9912-90003
RF Analyzer
N9912A
. See