Lan Interface - Keysight N9912A Service Manual

RF Analyzer Theory of Operation
N9912A

LAN Interface

LAN Interface
See the "System Configuration" section of the FieldFox User's Guide for details on reviewing and
configuring LAN settings.
Currently the LAN interface supports only communication for the Data Link software and sending SCPI
commands for service purposes.
The LAN interface supports Auto MDIX. When a LAN cable is connected to the FieldFox, if the other end of
the cable supports Auto MDIX, there is no need for a cross-over cable.
There are two LEDs on the LAN connector. When there is successful communication over a LAN cable, both
LEDs are active. If both LEDs are not active, consider using a cross-over cable.
Service Guide N9912-90003 5-29