5.2.4.
Traffic Class Config
Select "Advanced Config" and "QoS Config" and then "Traffic Class Config" to open
the screen shown in Figure 5-17. On this screen, you can configure the QoS and
Traffic Class settings.
Screen Description
QoS
Priority
Traffic Class
Figure 5-17 QoS Config
Displays "Enable"/"Disable" of the QoS function using IEEE802.1p.
"Disable" is the factory default setting.
Enabled
QoS is enabled.
Disabled
QoS is disabled.
Displays the packet priority value.
Displays the priority to transfer the packet.
49