Siemens SIMATIC VS120 Operating Instructions Manual page 105

Part 3/5: Edges
If you click on the Training - Edges tab, you start the editing of edges or retouching of
unnecessary image features.
Figure 9-15
The edges found by the algorithm are outlined in the image Specific edges can now be
marked as unimportant for each ROI by erasing them with a brush. To do this, you select the
respective ROI in the selection list or by clicking on it in the image, and erasing the edge with
the brush.
On the left, you can see various brush thicknesses that can be selected by clicking on them.
The erasures made in the currently selected ROI can be removed with the "Reset" button.
Vision Sensor SIMATIC VS120
Operating Instructions, Edition 02/2006, A5E00757507-01
Training - Edges tab
Operation
9.3 Working with setup support
9-31