Start Setup Support Over The Internet Explorer - Siemens SIMATIC VS120 Operating Instructions Manual

Next step
• If you receive a reply from the VS120 processing unit on the PC, follow the steps
• If you do not receive a reply from the VS120 processing unit, repeat the steps described
8.5

Start setup support over the Internet Explorer

8.5
To be able to work with the adjustment support implemented on the VS120 processing unit,
establish a connection from the Internet Explorer to the adjustment support
Requirements
The section
completed successfully. As described in the section
established a confirmed connection from the VS120 processing unit to the PC / PG.
Procedure
1. Start the PC
2. Turn on the power supply of the VS120 processing unit. Once the self-test has
3. Press the OK button of the VS120 processing unit. The IP address appears on the LCD
4. Note down the IP address of the VS120 processing unit
5. Start the Internet Explorer
6. In the "IP address" input box, enter the IP address of the VS120 processing unit.
7. Press the enter key on the keypad
Vision Sensor SIMATIC VS120
Operating Instructions, Edition 02/2006, A5E00757507-01
described in the section
Establish connection and between VS120 processing unit and PG / PG
in the section
and/or contact your network administrator
Establishing a connection between the VS120 processing unit and PC / PG
completed, go to "Adjust" in the LSD display
display
8.5 Start setup support over the Internet Explorer
Start adjustment support over the Internet Explorer
Check the connection
, you have
Commissioning
was
8-15