Table of Contents
Advertisement
Operation
9.3 Working with setup support
Select model / Select model set
This is where you enter the number of a previously trained model or model set that you want
to compare with a current specimen. The numbers of all previously trained models or model
sets are displayed in a drop-down list box.
Note
The "Model" drop-down list appears when the "Multimodel" drop-down list is set to "Use" in
the "Options - Extras" tab. This is equivalent to normal mode.
The "Model Set" drop-down list appears when the "Multimodel - Use" is set to "On" in the
"Options - Extras" tab . This is equivalent to classification mode.
Normal mode during test and recognition
Figure 9-18
9-34
Processing in normal mode
Vision Sensor SIMATIC VS120
Operating Instructions, Edition 02/2006, A5E00757507-01
Advertisement
Table of Contents
