Panasonic DVCPRO50 AJ-D960EG Operating Instructions Manual page 64

Setup menus
USER menu
<OPERATION>
No.
100
101
102
103
104
105
The underline on the setting item denotes the initial setting.
Item Setting
Superimposed Superimposed
No.
display display
SEARCH 0000
ENA 0001
SHTL MAX 0000
0001
0002
FF. REW 0000
MAX 0001
0002
AUDIO 0000
MUTE 0001
REF 0000
ALARM 0001
AUTO EE 0000
SEL 0001
0002
0003 BLACK1
0004
0005
64 (E)
DIAL This selects the direct search dial operation.
0: For direct search dial operations.
KEY
1: Operation is not transferred to the search mode unless the
search button is pressed.
8.4 This sets the maximum speed for shuttle operations.
0: 8.4 (7.0) normal speed
16
1: 16 normal speed
32
2: 32 normal speed
<Note>
The value for the DV/DVCAM format is shown in parenthesis
( ).
This sets the maximum speed for FF and REW operations.
16
0: 16 (32) normal speed
32
1: 32 (60) normal speed
50
2: 50 (100) normal speed
<Notes>
• The speeds given in the parentheses apply in the DVCPRO
(25 Mbps) mode.
• With the DV/DVCAM format, the maximum speed is set to
32 regardless of this item's settings.
This sets the status until the audio signal is output when
OFF
operation switches from the stop or search modes to the play
ON
mode.
0: The time until the audio is output is shortened.
1: The audio is output after the status stabilizes.
<Note>
When set to 0 (OFF), the sound in the initially output part is
incomplete. Therefore, this setting is not recommended for
broadcasts.
OFF This selects whether to warn the operator when the
REF.VIDEO signal has not been connected.
ON
0: Warning is not given.
1: Warning is given by the flashing STOP lamp.
S/F/R This selects the VTR mode in which the EE status is
established when the TAPE/EE switch is set to EE.
STOP
0: EE status is established in the STOP, FF or REW mode.
BLACK
However, EE status is always established in EJECT mode
regardless of the TAPE/EE switch setting.
GRAY
1: EE status is established only in the STOP mode. However,
EE status is always established in EJECT mode regardless
GRAY1
of the TAPE/EE switch setting.
2: EE status is established only in the STOP mode. However,
EJECT is set as follows depending on the setting of the
TAPE/EE switch.
At the EE setting;
At the TAPE setting; The picture turns black. The sound is
3: EE status is established in the STOP, FF or REW mode.
However, EJECT is set as follows depending on the setting
of the TAPE/EE switch.
At the EE setting;
At the TAPE setting; The picture turns black. The sound is
4: EE status is established only in the STOP mode. However,
EJECT is set as follows depending on the setting of the
TAPE/EE switch.
At the EE setting;
At the TAPE setting; The picture turns gray. The sound is
5: EE status is established in the STOP, FF or REW mode.
However, EJECT is set as follows depending on the setting
of the TAPE/EE switch.
At the EE setting;
At the TAPE setting; The picture turns gray. The sound is
Description
The EE status is established.
muted.
The EE status is established.
muted.
The EE status is established.
muted.
The EE status is established.
muted.