Video Menu; Tape Protect - Panasonic DVCPRO50 AJ-D960EG Operating Instructions Manual

Setup menus
USER menu
<TAPE PROTECT>
No.
400
401
402
403
The underline on the setting item denotes the initial setting.
<Note>
The cumulative standby time at the same tape position increases when transmitting
programmes or otherwise using identical materials repeatedly.
Item Setting
Superimposed Superimposed
No.
display display
STILL 0000
TIMER 0001
0002
0003
0004
0005
0006
0007
0008
SRC 0000
PROTECT 0001
DRUM 0000
STDBY 0001
STOP 0000
PROTECT 0001
74 (E)
0.5s This selects the time to be taken until the unit goes into the tape
protection mode when it is left standing in the stop or search still
5s
(JOG/VAR/SHTL) mode. (Unit: s = second, min = minute)
10s
<Notes>
20s
• When a DV/DVCAM tape is used, any setting above 10
30s
seconds will be treated as 10 seconds.
40s
However, the selection screen will show operations up to 2
50s
minutes.
1min
• STEP FWD and HALF LOADING are provided in the tape
2min
protection mode. Either of these can be set for STOP and
SEARCH STILL.
When the time selected as the setup menu item No. 400
STEP
(STILL TIMER) setting elapses while the unit is in the search
HALF
STILL (JOG/VAR/SHTL) mode, the unit automatically enters
one of the tape protection modes. This menu item is for
selecting which tape protection mode the unit is to enter.
0: STEP FWD.
1: HALF LOADING.
<Note>
When STEP FWD is selected, the unit automatically goes into
the STANDBY OFF (HALF LOADING) mode when the total
time for which the unit is left standing in the still status reaches
30 minutes (or 1 minute for a DV/DVCAM tape).
This selects the drum operation in the STANDBY OFF (HALF
OFF
LOADING) mode.
ON
0: The drum stops rotating.
1: The drum continues rotating.
STEP When the time selected as the setup menu item No. 400
(STILL TIMER) setting elapses while the unit is in the STOP
HALF
mode, the unit automatically enters one of the tape protection
modes. This menu item is for selecting which tape protection
mode the unit is to enter.
0: STEP FWD
1: HALF LOADING
<Note>
When STEP FWD is selected, the unit is automatically
transferred to the STANDBY OFF (HALF LOADING) mode
when the total time during which it has been left standing in
the STOP mode reaches 30 minutes (or 1 minute for a DV/
DVCAM tape).
Description