Executing Automatic Editing - Panasonic DVCPRO50 AJ-D960EG Operating Instructions Manual

Automatic editing

Executing automatic editing

1
Postroll
With assemble editing, editing continues for approx. 2 seconds even after the edit OUT point
has been passed, the tape is rewound to the OUT point, and the unit goes into the stop
mode.
With insert editing, the unit goes into the play mode after the edit OUT point has been
passed, the tape is rewound to the OUT point, and the unit goes into the stop mode.
Retry function
If the AUTO EDIT button is pressed again after the STOP button has been pressed to stop
the editing, editing will start again from the beginning.
Auto tag editing
If the AUTO EDIT button is pressed when the next edit point has not yet been entered upon
completion of editing, the previous edit OUT point will be entered as the IN point, and editing
is performed accordingly.
To release the auto tag mode, press one of the tape transport buttons (PLAY, etc.).
<Note>
The entered points are automatically cleared after editing is executed. However, the previous
editing points can be recalled by pressing the TRIM+ (or TRIM–) and SET buttons together.
Press the AUTO EDIT button.
Automatic editing is now performed.
• To stop the editing at any time, press the STOP button.
• When the edit OUT point is reached, the unit goes into the stop mode after
postrolling*.
* The postroll time can be set using setup menu No. 325 (POSTROLL TM).
ON VIDEO
AUDIO
OFF
POWER
METER
FULL/FINE
L
MONITOR SELECT
R
LEVEL CH1 CH2 CH3 CH4 CUE
HEADPHONES
PULL
OPEN PULL FOR VARIABLE
39 (E)
INPUT SELECT
Y PB PR CMPST SDTI(V&A) SDI
ANALOG AES/EBU USER SET SDI
CH CONDITION
TC/CTL
TC SET
SHIFT ADJ START RESET
W DVCPRO SCH CF
ASMBL VIDEO CH1 CH2 CH3 CH4 CUE TC
1 2 3 4 5 6 7 8
INSERT
MULTI CUE
REC A A
PREVIEW
AUTO EDIT
REVIEW IN – + OUT
PREROLL TRIM
IN SET OUT
PB
1
EJECT
AUTO OFF
TC MODE CONTROL
TC INT TAPE REMOTE PUSH
JOG SHTL
SLOW
REV
UB EXT EE LOCAL
STAND BY PLAYER RECORDER
SERVO REC INHIBIT
EDIT PLAY REC
REW STOP FF
SLOW MOTION
FWD
PULL
OPEN