Panasonic DVCPRO50 AJ-D960EG Operating Instructions Manual page 77

Setup menus
USER menu
<VIDEO>
No.
600
601
602
603
604
605
606
609
610
611
<Note>
614
When no optional board
(AJ-YA956 or AJ-YA957)
has been installed, setup
menus No. 610 and 611
are not displayed.
The underline on the setting item denotes the initial setting.
Item Setting
Superimposed Superimposed
No.
display display
INT SG 0000
0001
0002
OUT 0000
VSYNC 0001
V-MUTE 0000 N-MUTE
SEL 0001 LOW RF
CC (F1) 0000 BLANK
BLANK 0001
CC (F2) 0000 BLANK
BLANK 0001
FREEZE 0000
SEL 0001 FRAME
OUT C 0000
KILL 0001 COLOR
EDH 0000
0001
Pb/Pr 0000
IN LV 0001 B-CAM
INPUT 0000
C KILL 0001
Pb/Pr OUT 0000
LV 0001 B-CAM
77 (E)
This selects whether to generate the internal signal.
OFF
0: Signal is not generated.
BB
1: The black burst is generated.
CB
2: 100% colour bars are generated.
N-VF This selects whether to float the vertical sync position of the
video output in order to align the video output phase with the
VF
input in the EE/record/edit modes.
0: Signals are not floated.
1: Signals are floated.
Selects whether to mute the video output signals when a
blank on the tape has been detected during playback.
0: No muting. (Freeze)
1: Muting. (Set to gray.)
This selects ON or OFF for the closed caption signal in the
first field.
THRU
0: Forced blanking performed.
1: Blanking not performed.
<Note>
This setup menu is not displayed in the 625 mode.
This selects ON or OFF for the closed caption signal in the
second field.
THRU
0: Forced blanking performed.
1: Blanking not performed.
<Note>
This setup menu is not displayed in the 625 mode.
This selects the freeze mode for still pictures.
FIELD
0: Field freeze.
1: Frame freeze.
<Note>
When frame freeze has been selected, the frame slow status
is established with the slow setting.
This selects chroma colour killer processing for the video
B/W
output signals.
0: The signals are forcibly processed as B/W signals.
1: The signals are automatically processed.
OFF This selects whether to superimpose EDH onto the serial
output signals.
ON
0: EDH is not superimposed.
1: EDH is superimposed.
M II This selects the component input signal level.
0: M II level.
1: ß cam level.
<Note>
This setup menu is not displayed in the 625 mode.
B/W This selects colour killer processing for the video input signals.
0: The signals are forcibly processed as B/W signals.
AUTO
1: The signals are automatically processed.
This selects the analogue component output level.
M II
0: M II level
1: ß-CAM level
<Note>
This setup menu is not displayed in the 625 mode.
Description